Taig Micro Lathe, Milling Machine and Accessory Price List, all prices
subject to change without notice.
Updated July 27th, 2009
Orders receive a 10% discount on all lathe, accessory, milling machine and
spare parts items except where noted (Motors).
See Ordering Information
for shipping costs.
Taig Lathe and Accessories:
| L1017 |
$191.50
|
Micro Lathe II basic unit, factory assembled with tool
post and carriage depth stop (Pulleys and tailstock not included) 15"
bed.
|
| K1019 |
$159.50
|
Unassembled Micro Lathe II kit, headstock pre-assembled,
no machining necessary (Pulleys and tailstock not included) 15" bed.
|
| 1020 |
$74.90
|
WW Type Spindle cartridge and drawbar (use only W.W. Jewelers
collets) for replacement
|
| 1020A |
$104.30
|
WW complete headstock with WW spindle, pulley and drawbar
(use only W.W. Jewelers collets)
|
| 1020B |
$34.05
|
WW Type Spindle with purchase of lathe, in lieu of standard
spindle (use only W.W. Jewelers collets)
|
| 1021W | $106.40 | Marathon Motor 115v 60 HZ 1725 RPM 1/4 HP, 1/2" shaft prewired with switch and cord, net price,no discount available Net Price |
| 1022 | $5.25 | Motor mount bracket with necessary hardware, fits above motor and nema 48 frame motors |
| 1023 | $7.70 | Mounting board 12" x 18" used for No. 1021W motor (motor mount bracket not included) recommended, use 3M 500 belt |
| 1024 | $7.70 | Mounting board 8" x 24" (motor mount bracket not included) not recommended, use 3M 315 belt |
| 1026 | $3.75 | Depth stop for workpiece in chuck |
| 1030 | $64.75 | 4 jaw 3 1/4" dia. chuck 3/4-16 thd mount jaws adjusted independently (reversable heat treated steel jaws) |
| 1034 | $9.75 | Lathe Dog, holds work piece while turning between centers. |
| 1035 | $14.90 | Face plate 3 1/4" dia. 3/4-16 thd mount |
| 1036 | $5.80 | Face plate angle bracket set |
| 1037 | $8.10 | Face plate, 2" dia. 3/4-16 thd mount |
| 1037-3H | $10.90 | Face plate, 3 holes, 2" dia. (wood turners) |
| 1038 | $26.75 | 4 inch swivel joint tool rest (wood turners) |
| 1040 | $30.80 | Collet set, collet closer with 8 collet sizes 1/8,5/32,3/16,7/32,1/4,9/32,5/16 and one blank |
| 1041A | $4.50 | 1/8 collet |
| 1041B | $4.50 | 5/32 collet |
| 1041C | $4.50 | 3/16 collet |
| 1041D | $4.50 | 7/32 collet |
| 1041E | $4.50 | 1/4 collet |
| 1041F | $4.50 | 9/32 collet |
| 1041G | $4.50 | 5/16 collet |
| 1042 | $5.90 | Collet closer |
| 1043 | $2.90 | 4 blank collets furnished unslotted for making special arbors (may be bored and slotted) |
| 1045ER | $26.95 | ER16 Collet Adapter. Screws onto standard Taig 3/4"-16 spindle to allow the use of ER16 collets for milling and workholding. |
| 1050 | $64.10 | 3 Jaw 3 1/4" dia. self centering scroll chuck (steel body) with reversable aluminum soft jaws 3/4-16 thd. |
| 1051 | $9.00 | Additional blank soft jaw set for 3 jaw chuck |
| 1052 | $7.80 | Full circle soft jaw set for 3 jaw chuck |
| 1060 | $72.40 | 4 Jaw 3 1/4" dia. self centering scroll chuck (steel body) with aluminum soft jaws 3/4-16 thd. |
| 1090 | $37.80 | 0-1/4" Jacobs drill chuck, industrial quality 3/8-24 thd. |
| 1091 | $10.40 | 0-1/4" Jacobs drill chuck, commercial quality 3/8-24 thd. |
| 1092 | $10.80 | 1/16-3/8" Jacobs drill chuck, commercial quality 3/8-24 thd. |
| 1093 | $15.70 | 1/8-1/2" Jacobs drill chuck, commercial quality 3/8-24 thd. |
| 1095 | $28.75 | 6 piece high speed steel tool bit set, left,right,45 degree,round nose,boring bar, and cut off |
| 1096 | $1.95 | Unground tool bit 1/4" square |
| 1097A | $5.30 | Left hand tool bit |
| 1097B | $5.30 | Right hand tool bit |
| 1097C | $5.30 | 45 degree chamfer tool bit |
| 1097D | $5.30 | Round nose tool bit |
| 1097E | $5.30 | Boring bar tool bit |
| 1097F | $5.30 | Cut off tool bit |
| 1110 | $5.75 | Slitting saw arbor, screws directly on spindle including wrench |
| 1110ER | $5.75 | Slitting saw arbor, 3/8" shank for use in ER16 3/8" collet |
| 1111 | $12.80 | .032 X 2 1/2" dia high speed slitting saw |
| 1120 | $6.30 | Grinding wheel arbor, screws directly on spindle |
| 1122 | $7.00 | Grinding wheel set |
| 1130 | $4.15 | Blank arbor 1.00" dia. screws directly on spindle (may be machined for special jobs) |
| 1132 | $2.75 | Blank arbor |
| 1140 | $11.10 | Drill chuck arbor (3/8-24 thread), attaches Jacobs chucks to headstock spindle |
| 1140ER | $11.10 | Drill chuck arbor (3/8-24 thread), For ER spindle 3/8" straight shank |
| 1150 | $39.50 | Drilling tailstock, lever operated 5/8" off set with dead center, 3/8-24 thd for drill chucks |
| 1151 | $16.70 | Needle bearing center, spring loaded (fits in tailstock) |
| 1152 | $16.50 | Die holder for tailstock (will accept 13/16" and 1.00" button dies) |
| 1159 | $8.10 | Spare Gates polyurethane vee belt No.3M 315 12 1/2" flat length |
| 1160 | $8.10 | Spare Gates polyurethane vee belt No.3M 500 20" flat length |
| 1161 | $25.80 | 6 step pulley set (2 pulleys per set) 3/8" motor shaft 3M 500 belt included |
| 1162 | $25.80 | Pulley set as above for 1/2" shaft motor STD 3M 315 belt included (3M 500 belt optional) |
| 1170 | $4.70 | Extra tool post (same as supplied with lathe) |
| 1171 | $5.10 | Back tool post, tool bit mounts upside down, 2 tools may be used at same time |
| 1173 | $31.10 | T Bar Cut off Tool, height adjustable |
| 1190 | $25.30 | Steady rest 3/32" to 1 1/2" capacity |
| 1200 | $44.80 | Top slide (compound) mounts on crosslide for cutting tapers and angles |
| 1210 | $20.10 | Radius Turner, swings Tool Bit in arc |
| 1220 | $62.90 | Milling attachment mounts directly on crosslide (2 x 3 3/4" table) |
| 1221 | $14.60 | 3/4-16 chuck adapter, adapts chuck to mill table |
| 1224 | $20.00 | Fly Cutter, 1 1/4 to 2 1/2 inch diameter, 3/4-16 thread mount, tool bit included. |
| 1224ER | $20.00 | Fly Cutter, 3/8" shank for use in ER16 3/8" collet, imported. |
| 1225 | $27.80 | Milling vice, 2.125" opening x 2" wide |
| 2225 | $31.75 | Milling vice with handcrank, 2.125" opening x 2" wide (for milling machine only, not lathe milling attachment) |
| 1230A | $11.75 | 1/16 dia. milling cutter, 2 flute double end 3/16 shank, mounts in 3/16 collet |
| 1230B | $11.75 | 3/32 dia. milling cutter, 2 flute double end 3/16 shank, mounts in 3/16 collet |
| 1230C | $11.75 | 1/8 dia. milling cutter, 2 flute double end 3/16 shank, mounts in 3/16 collet |
| 1230D | $11.75 | 5/32 dia. milling cutter, 2 flute double end 3/16 shank, mounts in 3/16 collet |
| 1230E | $11.75 | 3/16 dia. milling cutter, 2 flute double end 3/16 shank, mounts in 3/16 collet |
| 1230 | $50.60 | 5 Piece end mill set (double ended) 1/16,3/32,1/8,5/32,3/16 |
| 1250 | $25.40 | Riser block kit for headstock and tool post (provides 6.00 swing tailstock riser not incl) |
| 1251 | $21.10 | Tailstock riser only, Also works as a Milling Machine Headstock Spacer. |
| 1300 | $8.25 | Book - "How to Run a Lathe" reprint of old South Bend Lathe Manual |
| 1310 | $7.50 | 1" Spindle Wrench |
| 2010 | $60.00 | 4" x 14" x 5/8" Tooling plate for Mill. Bolts down to either 2018 mill table or 2019 mill table. Plate has 56 10-32 holes that are 1" on center spaced |
| 2035 | $45.00 | Boring head with 3/8" shank |
| 2018ER | Micro Mill factory assembled (X travel 9.5 inches). | $778.00 |
| 2019ER | Micro Mill factory assembled (x travel 12 inches | $894.00 |
| -MU | UPGRADE ANY of the above MANUAL MILLS with a 1/4 hp, continuous duty, 3400 rpm motor. This motor is used on all the CNC and CNC ready mills | +$80.00 |
| 2018CR-ER | 2018 converted to CNC ready with Nema 23 motor mounts, adjustable bronze leadscrew nuts, and upgraded 1/4 horse power motor . Does not include stepper motors or control system. | $999.00 |
| 2019CR-ER | 2019 converted to CNC ready with Nema 23 motor mounts, adjustable bronze leadscrew nuts, and upgraded 1/4 horse power motor . Does not include stepper motors or control system. | $1100.00 |
| 2026ER | 2018 Full cnc mill with ER Spindle (same as Microproto 2000HD-ER) | $2155.00 |
| 2027ER | 2019 Full cnc mill with ER Spindle (same as Microproto 2000LE-ER) | $2355.00 |
| VC-ER | Vise 2.125" opening, 2" wide, with 3/16" and 3/8" collets for ER spindle mill. | +$35.00 |
|
HND-CR
|
Handcranks for all three axis in addition to CNC motor
mounts
|
$21.00
|
| Rotary Table | Rotary Table for 2026 or 2027 with 200 oz/in stepper. Only for use on the 2026ER or 2027ER |
+$600.00
|
| Mach License | Mach3 License only with purchase of the full CNC Milling Machine. The Mach 3 xml setup files are already included with CNC mill software disc |
.+$140.00
|
| Spindle Relay | Spindle and accessory relay box for full CNC mill. | +100.00 |
| 200-00ER | Complete headstock with ER Spindle | $117.50 |
| 200-03ERCT | ER Spindle Cartridge (spindle,2 bearings,spacer,ER nut) | $97.50 |
Available ER16 Collet Sizes
| 1040ER |
ER Collet Set with six ER collets (1/16, 1/8, 3/16, 1/4,
5/16, 3/8)
|
$56.00
|
| 1041ER-A |
1/16" ER 16 Collet
|
$9.85 |
| 1041ER-B |
1/8" ER 16 Collet
|
$9.85 |
| 1041ER-C |
3/16" ER 16 Collet
|
$9.85 |
| 1041ER-D |
1/4" ER 16 Collet
|
$9.85 |
| 1041ER-E |
5/16" ER 16 Collet
|
$9.85 |
| 1041ER-F |
3/8" ER 16 Collet
|
$9.85 |
| 1041ER-G |
3/32" ER 16 Collet
|
$9.85 |
| 1041ER-H |
5/64" ER 16 Collet
|
$9.85 |
| 1041ER-I |
5/32" ER 16 Collet
|
$9.85 |
| 1041ER-J |
1/32" ER 16 Collet
|
$9.85 |